Skip to main content

CNC Canned Cycles: Simplifying Machining Operations

 


CNC Canned Cycles: Simplifying Machining Operations

Canned cycles are pre-programmed subroutines within a CNC machine's control system. They allow you to perform complex machining operations with a single block of code, significantly simplifying programming and reducing the risk of errors. Here's a breakdown of common canned cycles:

1. Stock Removal Cycles (Turning/Facing)

These cycles are designed for efficient removal of material along the length (turning) or across the face (facing) of a workpiece.

External Turning Cycle (G71)

The G71 cycle is a powerful tool for rough turning external diameters. It involves multiple passes parallel to the Z-axis (longitudinal feed).

Comments

Post a Comment

Popular posts from this blog

CNC program transfer through electronic media.

The transfer of CNC (Computer Numerical Control) programs to machines through electronic media is a critical aspect of modern manufacturing, enabling efficiency, accuracy, and automation. Over the years, various electronic methods have evolved, each with its own advantages and applications.   Here are the primary means of CNC program transfer through electronic media: 1. RS-232 Serial Communication (DNC - Direct Numerical Control) The RS-232 serial interface is historically the most common method for connecting CNC machines to external devices, such as computers. Functionality: Program Transfer: CNC programs (G-code) are sent character by character over a serial cable (typically a DB9 or DB25 connector). Drip Feeding: For older CNC machines with limited internal memory, RS-232 is used for "drip feeding" or "Direct Numerical Control (DNC)." In this mode, the program is stored on a computer, and blocks of the program are sent to the CNC machine's buffer as...
Post a Comment
Read more

Check out some CNC projects from our users

SHOP NOW Check out some CNC projects from our users We've been talking for a few days about the terms and technology behind CNC and it's about time to show you some projects that our customers have made. You can find our projects page at:  http://carbide3d.com/projects/ Every project on there was made on a Shapeoko 3 or Nomad Pro, so these are exactly the kinds of projects that you can make in your home, garage, shop or office. If you have any questions just hit reply and ask us. -Edward   No longer want to receive these emails? Unsubscribe . Ca...
Post a Comment
Read more

Discover the Latest at Machines (April 2024)

To display this email in a browser, please click here IMPACT FACTOR 2.6 ...
Post a Comment
Read more